Honeywell SmartVFD HVAC MR4 User Manual page 104

HVAC A
PPLICATION
EXAMPLE:
You want to connect the Control signal 2 A (parameter M3.5.1.2) to digital input DI2 on Ba-
sic I/O board.
1
Locate the parameter Control signal 2 A (M3.5.1.2) on the keypad.
STOP READY Keypad
Main Menu
ID: M3
  Quick Setup
( 17 )

Monitor
( 5 )
Parameters

( 12 )
STOP READY Keypad

Digital Inputs
ID:404 M3.5.1.2
Ctrl Signal 1 A
DigIn SlotA.1
Ctrl Signal 2 A
DigIn Slot0.1
Ctrl Signal 1 B
DigIn Slot0.1
2
Enter the Edit mode.
STOP READY Keypad

Digital Inputs
ID:404 M3.5.1.2
Ctrl Signal 1 A
DigIn SlotA.1
Ctrl Signal 2 A
DigIn Slot0.1
Ctrl Signal 1 B
DigIn Slot0.1
Change the value: The editable part of the value (DigIN Slot0) is underlined and
blinking. Change the slot or assign the signal to Time Channel with the arrow keys
up and down. Make the terminal value (.1) editable by pressing the right key once
3
and change the value with arrow keys up and down.
Accept the change with OK button or return to previous menu level with BACK/
RESET button.
STOP READY Keypad

Parameters
ID: M3.5

References
( 18 )

Ramps and Brakes
( 7 )

I/O Config
( 4 )
STOP READY Keypad

Ctrl signal 2 A
ID: M3.5.1.2
Edit
Help
Add to favorites
Honeywell
STOP READY Keypad

I/O Config
ID: M3.5.1

Digital Inputs
( 26 )

Analog Inputs Analog Inputs
( 36 )

Digital Outputs
( 1 )
STOP READY

Ctrl signal 2 A
ID:404 M3.5.1.2
DigIN SlotA.2
DigIN Slot0 0-10
DigIN SlotA Varies
DigIN SlotB Varies
DigIN SlotC Varies
Min:
DigIN SlotD Varies
DigIN SlotE Varies
Max:
TimeChannel 1-3
Fieldbus CW 0-31
LLP signal 1-5
• 32
Keypad