Verifying Correct Bios Settings; Entering The Bios; Bios Settings For Tab 51156307-100 - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

Chapter 5 - Servicing
5.6

Verifying correct BIOS settings

All Honeywell systems must have the Honeywell recommended BIOS version. Honeywell configures
specific BIOS settings in the factory for each of the server platform configurations, and these settings
must not be altered. The following table provides the default BIOS settings for the server.
BIOS settings
Broadcom Dual
Onboard NIC

Entering the BIOS

l

BIOS settings for Tab 51156307-100

l
Exiting the BIOS
l
5.6.1 Entering the BIOS
To enter the BIOS
1. Turn on the server.
2. Press F2 on the keyboard to enter the BIOS Setup.
3. Verify that the BIOS version.
5.6.2 BIOS settings for Tab 51156307-100
System information
Product name
System model name
BIOS Version
System management Engine version
Service Tag
System manufacturer
System Manufacturer Contact info
System CPLD version
UEFI Compliance Version
FTE only
Use Onboard NICs
(NIC1 & NIC2)
- 40 -
No FTE, but 1 or 2 Ethernet ports
Use one or two Onboard NICs
(marked as NIC1 and NIC2)
Dell PowerEdge T130 server
T130, 001
1.2.5 or later
4.0.3.75 or later
XXXXXX
Dell
www.dell.com
1.0.0 or later
2.4 or higher