Installing Pcic Card In Dell T130 Server Using Magma - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

4. Insert the memory module.
5. Align the edge of the memory module connector with the alignment key on the memory module
socket, and insert the memory module into the socket.
6. Press down the memory module with your thumbs while pulling up on the socket ejectors with your
index fingers to lock the memory module into the socket.
When the memory module is properly seated in the socket, the socket ejectors on the memory
module socket align with the socket ejectors on the other sockets that have memory modules
installed.
7. Place the shroud back into the chassis and ensure that it is placed completely inside the chassis.
8. Close the side cover.
9. Replace the server in the cabinet.
10. Connect the power cords and cables to the back panel of the server.
11. Press the Power On/Off button on the server, to turn on the power.
5.5

Installing PCIC card in Dell T130 server using Magma

The Magma PCIe host card is located in the PCIe slot 1.
ATTENTION
The memory module socket has an alignment key that allows you to install the memory
module in the socket only in one way.
- 37 -
Chapter 5 - Servicing