Safety Compliance; Light Industrial Regulatory Compliance; Electromagnetic Compatibility - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

Chapter 2 - Planning
ATTENTION
The following formula is a proximity guideline, for use of Portable Transceivers (walkie-talkies) in
the frequency range of 80MHz to 1GHz.
D > 0.30*√ {P} (D must be greater than 0.30 multiplied by the square root of P)
D = Distance from equipment, in meters.
P = Power Output of the Portable Transceivers (walkie-talkies), in Watts.
Examples:
P = 10 Watts, D > 0.949 meters
P = 5 Watts, D > 0.671 meters
P = 1 Watt, D > 0.300 meters
Electrical cables, which are routed external to the equipment, must be fully shielded cables (360
degree metallic shielding), to comply with the above EMC standards.
2.7.2

Safety compliance

The following are the product safety compliance.
CSA C22.2 No. 1010.1-92 (R1999) and 1010.1B-97 (R2001) Am. 2
l
IEC 61010-1, 2001, 2nd edition
l
ATTENTION
In the above referenced standards is a "Normative Reference" section citing additional
standards, which may apply as, suited and required for product compliance.
2.8

Light industrial regulatory compliance

The compliance specifications in this section apply to installations other than cabinets.
ATTENTION
Honeywell does not claim Safety Compliance or Electromagnetic Compatibility (EMC)
Compliance for system equipment configurations that have not been described in this guide as
standard system configurations. Any equipment configuration other than that described in this
publication decertifies the Safety and EMC compliance of this product.

Electromagnetic Compatibility

l
Safety compliance
l
2.8.1 Electromagnetic Compatibility
The following table provides the Electromagnetic Compatibility (EMC) specifications (Industrial
- 21 -