Honeywell MZ-PCSV74 Planning, Installation And Service Manual page 38

Chapter 5 - Servicing
5.5.1 To insert the Magma PCIe card
1. Shut down the computer.
2. Remove the power cords from the rear end of the server and wait for 20 seconds.
3. Remove the front bezel. Refer to the section Removing the front bezel.
4. Remove the side cover of the server. Refer to the section Removing the side cover.
5. Press the release latch on the side panel and lift it up, as shown in the below figure.
6. Locate the slot 1.
7. Remove the metal shield in slot 1.
- 38 -