Experion Nodes Slot Requirement; Fte Supervisory (Default); Cnet Configuration Using Pcic Interface; Memory Configuration For Dell T130 - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

Chapter 2 - Planning
2.4

Experion nodes slot requirement

2.4.1 Default configurations for FTE
Broadcom on-board NICs are enabled without PXE.
l
If you are using FTE slot only, then use on-board NICs.
l
2.4.2

FTE supervisory (Default)

FTE must be configured on on-board NIC.
Slot number
Slot 1
Slot 2
Slot 3
Slot 4
2.4.3

Cnet configuration using PCIC interface

The server does not support PCIC interface, you must use Magma PCIe to PCI converter box.
Slot number
Slot 1
Slot 2
Slot 3
Slot 4
2.5

Memory configuration for Dell T130

Standard memory for Dell T130 server are 51156307 -100 8GB (2x4GB) DDR4 UDIMM 2133 MHz or
faster and 51156307 - 200 16GB (2x8GB) DDR4 UDIMM 2133 MHz or faster and must be installed in
pairs.
2.5.1 8 GB, consisting of two 4 GB ECC DDR4 UDIMM 2133 MHz or
faster
The following table provides memory configurations layout for 8 GB, consisting of two 4 GB ECC DDR4
Description
PCIe x 8 CPU
PCIe_G3 x 16 CPU
PCIe_G3 x 1 PCH
PCIe_G3 x 8 PCH
Description
PCIe x 8 CPU
PCIe_G3 x 16 CPU
PCIe_G3 x1 PCH
PCIe_G3 x 8 PCH
Option
Magma PCIe host card.
-
-
-
- 13 -
Option
-
-
-
-