Adding Additional Memory - Honeywell MZ-PCSV74 Planning, Installation And Service Manual

Chapter 5 - Servicing
5.4

Adding additional memory

The standard memory capacity is 4 GB. The system memory can be increased to 8 GB, MZ-PCEM15.
Memory devices must be from the same memory supplier. For further information about the memory
configurations, refer to the section
5.4.1 Prerequisites
Turn off the system
l
Disconnecting power cords and cables from the server.
l
CAUTION
The DIMMs are hot to the touch for some time after the system is powered down. Allow time for
the DIMMs to cool before handling them. Handle the DIMMs by the edges and avoid touching
DIMM components.
5.4.2 To add additional memory
1. Remove the side cover of the server. Refer to the section
2. The DIMM memory sockets are now exposed.
3. While wearing a grounded ESD wrist strap, press the socket ejectors on the memory module
socket down to allow the memory module to be inserted into the socket.
Memory configuration for Dell
- 36 -
T130.
Removing the Side Cover.