Dlp- D190 View Ce-Series Ethernet And Pos Ports Utilization Pm Parameters - Cisco ONS 15454 SDH Procedure Manual

DLP- D190 View CE-Series Ethernet and POS Ports Utilization PM Parameters

DLP-D190 View CE-Series Ethernet and POS Ports Utilization PM Parameters
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For CE-Series card provisioning, refer to the Ethernet Card Software Feature and Configuration Guide
Note
for the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327.
In node view, double-click the CE-series Ethernet card where you want to view PM counts. The card
Step 1
view appears.
Click the Performance > Ether Ports > Utilization
Step 2
Utilization tabs.
Figure 18-13
Ether ports
Click Refresh. Performance monitoring statistics for each port on the card appear.
Step 3
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-78
This task enables you to view CE-Series card Ethernet and POS port
Utilization PM counts at selected time intervals to detect possible
performance problems.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Retrieve or higher
Ether Ports Utilization on the CE-Series Card View Performance Window
Utilization Performance
tab tab tab
Interval Refresh
drop-down list button
(Figure
Card
view
Help
button
Chapter 18 DLPs D100 to D199
18-13) or Performance > POS Ports >
78-17194-01