Setting Fence Stops - Grizzly G0656XW Owner's Manual

Setting Fence Stops

The fence stops simplify the task of adjusting the
fence to 45˚ inward, 90˚, and 45˚ outward (135˚).
Tools Needed
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Open-End Wrench 13mm .................................. 1
Setting 45° Inward Fence Stop
1.
Use a 45˚ square to adjust fence to 45˚
inward position, as shown in Figure 68.
Figure 68. Example of adjusting fence 45˚
inward.
2. Loosen jam nut shown in Figure 69.
45° Stop
Bolt
Jam Nut
Figure 69. 45˚ inward fence stop bolt.
Model G0656W/G0656XW (Mfd. Since 08/16)
Qty
Fence Bracket
(1 of 2)
135° Stop
Bolt
3. Adjust 45˚ stop bolt until it makes contact with
135° stop bolt (see Figure 69).
4. Retighten jam nut loosened in Step 2.
Setting 90° Fence Stop
1.
Use a 90˚ square to adjust fence to 90˚ (see
Figure 70).
Figure 70. Example of adjusting fence to 90˚.
2.
Flip 90˚ swing stop into position shown in
Figure 71.
Jam Nut
Fence Stop Bolt
Figure 71. 90˚ swing stop engaged.
3. Loosen jam nut on 90˚ fence stop bolt (see
Figure 71).
4. Adjust the 90˚ fence stop bolt until it makes
contact with 90˚ swing stop.
5. Retighten jam nut loosened in Step 3.
Swing Stop
-43-