Labels - Grizzly G0656XW Owner's Manual

MODEL G0656XW
8" JOINTER w/SPIRAL
CUTTERHEAD & MOBILE BASE
Specifications WARNING!
To reduce the risk of serious injury when using this machine:
Motor: 3 HP, 240V, Single-Phase, 40 Hz
1. Read and understand owner's manual before operating.
Full-Load Amp Draw: 12A
2. Always wear approved eye protection and respirator.
Cutterhead: Spiral w/Indexable Inserts
3. Except when rabbeting, keep all guards in place and in proper
Number of Spiral Rows/Inserts: 4/40
operating condition. Always replace the guard after rabbeting.
Cuts Per Minute: 21,400 4. Never perform jointing, planing, or rabbeting cuts on pieces
smaller than 8" long, 3/4" wide, or 1/4" thick.
Cutterhead Diameter: 3"
5. Always use push blocks when face planing.
Replacement Inserts: H7319
6. Keep hands at least 12" away from cutterhead.
Insert Size: 14 x 14 x 2mm 347754 7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
Cutterhead Speed: 4800 RPM
can get entangled. Tie back long hair and roll up sleeves.
Maximum Depth of Cut: 1/8"
9. Turn motor OFF and disconnect power before changing inserts,
Maximum Rabbeting Depth: 1/2"
adjusting tables/fence, or servicing.
Fence Tilt: 45º, 90º, 135º
10. Be aware of "kickback" hazards and how to prevent them.
Table Size: 72-3/4" x 9-3/8" 11. Before starting, ensure tables are adjusted properly, inserts are
secure, and jointer is stable.
Weight: 436 lbs.
12. Do not joint boards with cracks, loose knots, or any defects.
13. Only operate in a dry environment free of rain or dampness.
14. Always support the workpiece against the fence and table. Never
attempt any operation free-handed.
Date
15. Always feed workpiece against cutterhead rotation. Never move
workpiece backward during operation.
Serial #
16. Prevent unauthorized use by children or untrained users;
Manufactured for Grizzly in China restrict access or disable machine when unattended.
401V2
ROTATING CUTTERHEAD BELOW!
Use this guard for all operations
possible, and immediately re-install it
following operations that require its
removal.
KICKBACK HAZARD!
1. Ensure outfeed table is even with
knives.
2. Never exceed maximum depth of cut.
3. Do not stand directly behind workpiece.
ALWAYS USE PUSH BLOCKS!
Push blocks minimize possibility of
operator's hands contacting cutterhead
while cutting.
95 x 95mm
COLOR CODES
WARNING PANTONE 151 C or RAL 2005
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
GRIZZLY GREEN PANTONE 568C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If artwork changes are required, contact us immediately at manuals@grizzly.com.
412
411
410
REF PART #
401V2 P0656W401V2
401V2 P0656XW401V2 MACHINE ID LABEL (G0656XW) V2.08.16
402 P0656W402
403 P0656W403
404 P0656W404
405 P0656W405
406 P0656W406
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-54-
ROTATING CUTTERHEAD BELOW!
Use this guard for all operations
possible, and immediately re-install it
following operations that require its
removal.
KICKBACK HAZARD!
1. Ensure outfeed table is even with
knives.
2. Never exceed maximum depth of cut.
3. Do not stand directly behind workpiece.
ALWAYS USE PUSH BLOCKS!
Push blocks minimize possibility of
operator's hands contacting cutterhead
while cutting.
402
32 x 258mm
140 x 122mm
COLOR CODES
WARNING PANTONE 151 C or RAL 2005
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
GRIZZLY GREEN
PANTONE 568C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If artwork changes are required, contact us immediately at manuals@grizzly.com.
G0 65 6X
W Ma ch
ine La be
(12 /21 /15 ls A
) • 1:1 Sizin
g (Lab els
actu al size) are
• Labe ls
mus t be
oil-re sista mad e of
nt mate
rial
MO DEL
G06 56X
8" JOI NTE W
Spec ifica CUT TER R w/S PIR
tions HEA D & AL
Motor:
3 HP, 240V, MO BIL E
Full-Lo ad Single -Phase BAS E
Amp Draw: , 40 Hz WA RNI
Cutterh ead: Spiral 12A To reduce NG!
w/Inde xable 1. Read the risk of seriou
Numbe r of Spiral Inserts 2. Always and unders s injury
Cuts Per Rows/I nserts wear approv tand owner' when using this machin
Minute : : 4/40 3. Except ed eye s manua l before e:
Cutterh ead Diame 21,400 operat ing when rabbet protec tion operat ing.
ter: 3" condit ion. ing, keep all guards and respira
Replac ement 4. Never perform Always in place tor.
Insert Size: Inserts : H7319 smalle r jointin g, replace the guard and in proper
14 x 14 3477 54 5. Always than 8" long, 3/4" planing , or rabbet after rabbet
Cutterh x 2mm use push wide, or ing cuts ing.
ead Speed : 4800 RPM 6. Keep hands at blocks when face 1/4" thick. on pieces
Maxim um Depth of 7. Never least 12" planing
Maxim um Cut: 1/8" 8. Do not cut deeper away from .
Rabbe ting wear loose than 1/8" on a single cutterh ead.
Fence Tilt: Depth: can get clothin g, pass.
45º, 90º, 1/2" 9. Turn entang led. Tie back gloves , jewelry
Table Size: 135º motor OFF long hair , or other
Weigh t: 72-3/4" x 9-3/8" adjusti ng tables/ fence, and discon nect power and roll items that
436 lbs. 10. Be aware of or servici before changi up sleeve s.
11. Before "kickb ack" ng. ng inserts
startin g, hazard s ,
secure , and jointer ensure tables are and how to preven
12. Do not joint is stable. adjuste t them.
13. Only boards d proper ly, inserts
Date 14. Always operat e in a dry with cracks , loose are
suppo rt enviro nment knots, or
attemp t the workpi free of rain any defects
Serial # 15. Always any operat ece agains or dampn .
Manufac feed workpi ion free-ha nded. t the fence ess.
tured for Grizzly workpi ece ece agains and table. Never
in China 16. Preven backw ard during t cutterh ead rotatio
restric t t unauth orized use operat ion. n. Never
access by childre move
or disable n or untrain
machin e when ed users;
unatte nded.
ROTA TING 140 x 122m
CUTT ERHE
Use this m
guard for AD BELO W!
possib le, and immed all opera tions
follow ing iately re-ins
opera tions tall it
remov al. that requir
e its
KICK BACK
1. Ensur e outfee HAZA RD!
knives . d table
is even
2. Never excee d with
3. Do not maxim um
stand direct depth of
ly behin cut.
d workp
iece.
ALWA YS
USE PUSH
Push blocks BLOC KS!
minim ize
opera tor's possib ility
while cuttin hands conta of
cting cutter
g. head
95 x 95mm
32 x 295m
m
COLO R
CODE S
WARN ING
PANTO NE 151
GRIZZ LY LOGO RED C or RAL
2005
PANTO NE 711C
GRIZZ LY GREE N or RAL
3020
PANTO NE 568C
FOR GRIZ COP YRIG
WITH OUT ZLY MAC HT © GRIZ
WRIT TEN HINE S ONLY ZLY INDU
! DO NOT STRI AL,
If artwo APPR OVA REPR ODU INC.
rk chan ges are L! Grizz CE OR
requi red, ly will not CHAN GE
conta ct accep t label s chan THIS ARTW
us imme ORK
diate ly ged witho
at manu als@ grizz ut appro
ly.co m. val.
Jointer Generic Labels A
409
DESCRIPTION
MACHINE ID LABEL (G0656W) V2.08.16
CUTTERHEAD WARNING LABEL
FENCE WARNING LABEL
ELECTRICITY LABEL
EYE/EAR/LUNG WARNING LABEL
DISCONNECT POWER LABEL

Labels

Cutterhead
Failure to keep hands clear
exposed between
of cutterhead will result in
these lines.
serious personal injury.
95 x 95mm
340 x 41mm
REF PART #
407 P0656W407
408 P0656W408
408 P0656XW408
409 P0656W409
410 P0656W410
411 P0656W411
412 P0656W412
Model G0656W/G0656XW (Mfd. Since 08/16)
404
36 x 32mm
Failure to keep hands clear
of cutterhead will result in
serious personal injury.
403
Jointer Generic Labels B
50 x 84mm
Jointer Generic Labels B
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
50 x 84mm
G0656XW Machine Labels A
• 1:1 Sizing (Labels are
(5/21/15)
• Labels must be made of
MODEL G0656XW
8" JOINTER w/SPIRAL
CUTTERHEAD & MOBILE BASE
Specifications WARNING!
Motor: 3 HP, 240V, Single-Phase, 40 Hz To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
Full-Load Amp Draw: 15A
2. Always wear approved eye protection and respirator.
Cutterhead: 4 Spirals, 40 Inserts
3. Except when rabbeting, keep all guards in place and in proper
Replacement Inserts: Model T21348 operating condition. Always replace the guard after rabbeting.
50 x 84mm
Insert Size: 14 x 14 x 2mm 4. Never perform jointing, planing, or rabbeting cuts on pieces
smaller than 8" long, 3/4" wide, or 1/4" thick.
Maximum Depth of Cut: 1/8"
5. Always use push blocks when face planing.
Maximum Rabbeting Depth: 1/2"
6. Keep hands at least 12" away from cutterhead.
Cutterhead Speed: 4800 RPM
7. Never cut deeper than 1/8" on a single pass.
8. Do not wear loose clothing, gloves, jewelry, or other items that
Cuts Per Minute: 21,400
can get entangled. Tie back long hair and roll up sleeves.
Fence Tilt: 45º, 90º, 135º
9. Turn motor OFF and disconnect power before changing inserts,
Table Size: 9" x 72-1/2"
adjusting tables/fence, or servicing.
Weight: 465 lbs.
10. Be aware of "kickback" hazards and how to prevent them.
11. Before starting, ensure tables are adjusted properly, inserts are
secure, and jointer is stable.
12. Do not joint boards with cracks, loose knots, or any defects.
13. Only operate in a dry environment free of rain or dampness.
14. Always support the workpiece against the fence and table. Never
attempt any operation free-handed.
Date
15. Always feed workpiece against cutterhead rotation. Never move
workpiece backward during operation.
Serial #
16. Prevent unauthorized use by children or untrained users;
Jointer Generic Labels B
Manufactured for Grizzly in China restrict access or disable machine when unattended.
ROTATING
CUTTERHEAD BELOW!
DANGER!
KICKBACK HAZARD!
1. Ensure outfeed table is PUSH BLOCKS!
Use this guard for all
even with knives.
Push blocks minimize the
operations possible, and WARNING! WARNING!
2. Never exceed the
possibility of operator's
immediately reinstall it
maximum depth of cut.
hands contacting the
following operations that
3. Do not stand directly
require its removal. cutterhead while cutting.
behind workpiece.
408
COLOR CODES
WARNING PANTONE 151 C or RAL 2005
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
GRIZZLY GREEN PANTONE 568C
DESCRIPTION
READ MANUAL LABEL
MODEL NUMBER LABEL (G0656W)
MODEL NUMBER LABEL (G0656XW)
GRIZZLY.COM LABEL
GRIZZLY GREEN TOUCH-UP PAINT
GRIZZLY BEIGE TOUCH-UP PAINT
GRIZZLY NAMEPLATE
19 x 152mm
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
405
50 x 84mm
WARNING!
actual size)
To reduce risk of death EYE/EAR/LUNG
or serious injury, read
INJURY HAZARD!
36 x 32mm
oil-resistant material
manual BEFORE using
Always wear safety
machine.
glasses, ear protection,
To get a new manual, call
and respirator when
(800) 523-4777 or go to
using this machine.
www.grizzly.com.
50 x 84mm 50 x 84mm
406
36 x 32mm
50 x 84mm
140 x 122mm
407
WARNING!
ALWAYS USE
To reduce risk of death EYE/EAR/LUNG
or serious injury, read
INJURY HAZARD!
manual BEFORE using
Always wear safety
machine.
glasses, ear protection,
To get a new manual, call
and respirator when
(800) 523-4777 or go to
using this machine.
www.grizzly.com.
50 x 84mm 50 x 84mm
152 x 82mm
36 x 32mm
230 x 25mm
50 x 84mm