Identification - Grizzly G0656XW Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
A
B
P
O
A. Outfeed Table
B. Fence
C. Cutterhead Guard
D. Fence Lock
E. Fence Adjustment Knob
F.
Fence Tilt Handle
G. ON/OFF Switch
H. Infeed Table
For Your Own Safety Read Instruction Manual Before Operating Jointer
a) Wear eye protection.
b) Always keep cutterhead and drive guards in place and in proper operating condition. ALWAYS
replace cutterhead guard after rabbeting operations.
c) Never make jointing or rabbeting cuts deeper than
d) Always use hold-down or push blocks when jointing material narrower than 3" or surface
planing material thinner than 3".
e) Never perform jointing, planing, or rabbeting cuts on pieces shorter than 8" in length.
Model G0656W/G0656XW (Mfd. Since 08/16)

Identification

C E
D F
N
G
H
J
I
L
M
L
I. Infeed Table Lock
J. Fence Tilt Lock
K. Outfeed Table Lock
L. Infeed Table Handwheel
M. Depth Scale
N. Foot Pedal Caster Assembly
O. Dust Port
P. Outfeed Table Handwheel
⁄ " or planing cuts deeper than
1
8
K
⁄ ".
1
16
-3-