Honeywell IdentIPoint Installation Instructions Manual page 38

HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
Connector
2 DO-1-GND
Connector J12
1 RL-0-Com
2 RL-0-NO
3 RL-0-NC
Connector J13
1 RL-1-Com
2 RL-1-NO
3 RL-1-NC
Connector J14
1 RS485-A
2 RS485-B
3 RS485-GND
Connector J17
1 InterLock-0
2 InterLock-0-GND
Connector J18
1 InterLock-1
2 InterLock-1-GND
1 12V DC Power
NOTE:
1. Frame-Ground should always be the first signal to connect to and last signal to disconnect from the system.
2. Pulled-up to high level internally.
95-7767
Signal Description
Digital Output 1 Ground
Relay 0 Dry Contact Common
Relay 0 Dry Contact Normal Open
Relay 0 Dry Contact Normal Close
Relay 1 Dry Contact Common
Relay 1 Dry Contact Normal Open
Relay 1 Dry Contact Normal Close
RS485 bus A (non-inverting signal) signal
RS485 bus B (inverting signal) signal
RS485 bus Ground
Interlock Input 0 (Relay 0 bypass activation)
Interlock 0 Ground
Interlock Input 1 (Relay 1 bypass activation)
Interlock 1 Ground
12VDC Power Input, tolerate up to 28VDC
38