Honeywell IdentIPoint Installation Instructions Manual page 12

HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
Power Power
Ac tiv ity Ac tiv ity
10/100 10/100
OPTICAL
ALARM
TAMPER
Mounting and Installing the Input/Output
Module
NOTE:
• The IOM can be mounted either on a drywall or on a
concrete wall using conduits and a gang box.
95-7767
Model: BTSTD Model: BTSTD
IdentIPoint Standard Indoor IdentIPoint Standard Indoor
Power 10 - 28 VDC, PoE Power 10 - 28 VDC, PoE
MAC ID Ethernet 0040840AF33E MAC ID Ethernet 0040840AF33E
MAC ID Wi - fi 00408 -IOAF33F MAC ID Wi - fi 00408 -IOAF33F
Manufactured: Manufactured: 2009.07.13 2009.07.13 MADE IN MADE IN CHINA CHINA
1 1 1 1
4 4 4 4 4 4
2 2 2 2
3 3 3 3 3 3
2 2 2 2 2 2 3 3 3 3
1 1 1 1 1 1 4 4 4 4
FACTORY
RESET
SWITCH
Fig. 11. Reader connections
LED INDICATORS AT THE BACK
Marking Marking Color Color Descrip on Descrip on
10/100 10/100 Green Green On when network is 100 On when network is 100
MBit MBit
Ac vity Ac vity Orange Orange Flashes on network ac vity Flashes on network ac vity
Power Power Blue Blue On if power on On if power on
CONNECTORS AT THE BACK
J9 J9 PIN PIN
SAI-1-GND SAI-1-GND 9 9
SAI-1 SAI-1 8 8
SAI-0-GND SAI-0-GND 7 7
SAI-0 SAI-0 6 6
Relay-NO Relay-NO 5 5
Relay-NC Relay-NC 4 4
Relay-C Relay-C 3 3
Power-GND Power-GND 2 2
Power-IN Power-IN 1 1
DIP SWITCH S1
Posi on Posi on Effect when "ON" Effect when "ON"
(Posi on Le ) (Posi on Le )
1 1 RS485-A pull up RS485-A pull up
2 2 RS485 termina on RS485 termina on
3 3 RS485-B pull down RS485-B pull down
4 4 Wifi Disable Wifi Disable
• The drywall and gang boxes shown here are just
representations of the actual hardware. During
installation, please use the hardware as per the
required dimensions and availability.
• To install IdentIPoint devices in place of older devices
that have been removed, you may use the
TRADELINE® 209651A Universal Cover Plate to
cover marks from the older devices and allow
mounting of IdentIPoint devices on vertical or
horizontal outlet boxes. See document no. 69-1093
for more details.
12
PIN PIN J10 J10
1 1 Power-OUT Power-OUT
2 2 Power-GND Power-GND
3 3 RS485-A RS485-A
4 4 RS485-B RS485-B
5 5 RS485-GND RS485-GND
6 6 DO DO
7 7 DOGnd DOGnd
8 8 SAI-2 SAI-2
9 9 SAI-2-GND SAI-2-GND
10 10 Frame-GND Frame-GND