Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–6 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
Many of the controls will be explained in greater
detail later in this manual.
Control Panel & Headstock
C
B
A
K
J
I
Figure 1. Control panel and headstock controls
and components.
-4-
manual
BEFORE
D
E
F
G
H
A. Spindle Speed Lever: Selects one of four
different spindle speeds within the selected
speed range.
B. Emergency Stop/RESET Button: Stops all
machine functions. Twist clockwise to reset.
C. Power Start Button: Enables power to spin-
dle lever (see Figure 2 on Page 5).
D. Cutting Fluid Pump Switch: Turns cut-
ting fluid pump ON, enabling flow to cutting
fluid valve and nozzle (see Identification on
Page 3).
E. Power
Lamp:
Illuminates
power switch is turned ON and Emergency
Stop/RESET button is reset.
F.
Jog/Inching Button: Powers forward spindle
rotation as long as it is pressed.
G. Spindle Speed Range Lever: Selects
between high and low spindle speed ranges.
H. Quick-Change Gearbox Levers and Dials:
Control leadscrew and feed rod speed for
threading and feeding operations.
I.
Spindle Speed Chart: Indicates different
lever positions for various spindle speeds.
J.
Thread and Feed Chart: Shows how to
arrange gearbox controls for different thread-
ing or feeding options.
K. Feed Direction Lever: Controls direction of
leadscrew and feed rod rotation when spindle
lever is used.
Model G0782 (Mfd. Since 10/15)
when
main
Advertisement
Table of Contents
