Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
refer to figures 1–5 and the following descrip-
tions to become familiar with the basic controls of
this machine.
Headstock
a
figure 1. headstock controls.
A. ON/Off Switch w/Disabling Key: turns
motor ON when flipped up; turns motor OFF
when pressed down. remove yellow key to
disable switch so motor cannot start.
b. Spindle Speed Lever: adjusts spindle speed
from low to high within range governed by
pulley belt position (see Page 33 for more
information).
C. Spindle: accepts Mt#2 centers or 1" x 8
tpi (rh) tooling for mounting workpieces.
rotates counterclockwise (down, toward
front of machine).
-4-
manual
bEfORE
C
B
Tailstock
d
figure 2. tailstock controls.
D. Quill: holds Mt#2 centers or tooling. Moves
toward and away from spindle.
E. Quill Locking Nut: Secures quill in position.
f.
Tailstock Handwheel: rotates to move quill
toward and away from spindle.
G. Tailstock Clamp bolts (2): Secure position
of tailstock along bed.
Tool Rest
h
i
figure 3. tool rest controls.
H. Tool Rest: provides stable platform for cut-
ting tools.
i.
Tool Rest Lock Handle: Secures tool rest in
position.
J.
Tool Rest base Locking bolt: Secures tool
rest base in position along bed.
Model G0842 (Mfd. Since 04/18)
E
F
g
J
Advertisement
Table of Contents
