Controls & Components - Grizzly T28522 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
G
Figure 1. Controls and components—front.
A. Clamping Leaf: Holds and positions clamp-
ing fingers.
B. Clamping Handle (1 of 2): Use to raise and
lower clamping leaf.
C. Clamping Finger (1 of 5): Holds workpiece
in place while bending block produces bend.
Fingers can be individually removed or repo-
sitioned to allow clearance for workpiece.
D. Bending Block: Pivots with bending leaf to
produce bend in workpiece.
-4-
manual BEFORE
A
B
C
D
E
F
E. Clamping Pressure
(1 of 2): Move up or down to set clamp-
ing pressure on workpiece according to
workpiece gauge. Lock rod in place with jam
nuts.
F. Bending Leaf: Swivels up to bend workpiece.
G. Bending Handle (1 of 2): Use to raise bend-
ing leaf and produce bend in workpiece.
H
Figure 2. Controls and components—rear.
H. Setback Wheel (1 of 2): Use to adjust dis-
tance between clamping fingers and bend-
ing block. Moves clamping leaf forward and
backward.
Sharp edges of sheet metal
can easily cut fingers,
hands, or other body parts.
Always wear leather gloves
when handling sheet metal,
and always chamfer and
deburr the edges.
To reduce your risk of
serious injury, read this
entire
using machine.
Model T28522 (Mfd. Since 09/18)
Adjustment Rod
manual BEFORE