Controls & Components - Grizzly T32536 Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–3 and the following descrip-
tions to become familiar with the basic controls of
this machine.
A
B
C
Figure 1. Headstock components.
A. Spindle Adjustment Knob: Allows hand
rotation of spindle to check clearances before
powering up lathe.
B. Spindle Speed Dial: Controls spindle speed.
Always turn dial to lowest setting before start-
ing lathe.
C. ON/OFF Paddle Switch w/Disabling Key:
Turns lathe motor ON and OFF. Remove
yellow disabling key to prevent unauthorized
operation of machine.
-4-
manual BEFORE
E
D
Figure 2. Tailstock components.
D. Quill Adjustment Knob: Moves quill toward
or away from spindle.
E. Quill Lock Handle: Secures quill in position.
F. Quill: Holds centers or tooling. Can be
moved toward and away from spindle.
G. Tailstock Lock Lever: Secures tailstock in
position along bed.
H
Figure 3. Tool rest controls.
H. Tool Rest: Provides stable platform for cut-
ting tools.
I. Tool Rest Lock Handle: Secures tool rest in
position.
J. Tool Rest Base (Banjo) Lock Lever:
Secures tool rest base in position along bed.
Model T32536 (Mfd. Since 10/20)
F
G
I
J