Table of Contents
Advertisement
Carriage
L
T
R
S
Figure 2. Carriage controls.
L.
Four-Way Tool Post: Allows a maximum of
four tools to be loaded simultaneously.
M. Compound Rest Handwheel: Moves tool
toward and away from workpiece at preset
angle.
N. Thread Dial: Indicates when to engage the
half nut during inch threading operations.
O. Spindle Lever: Starts, stops, and reverses
direction of spindle rotation.
P. Half Nut Lever: Engages/disengages half
nut for threading operations.
Q. Carriage Lock: Secures carriage in place for
greater rigidity when it should not move.
R. Feed Selection Lever: Selects power feed
for carriage or cross slide.
S. Carriage Handwheel: Moves carriage along
the bed.
T.
Cross Slide Handwheel: Moves cross slide
toward and away from workpiece.
Model G0782 (Mfd. Since 10/15)
M
N
Q
P
O
Tailstock
U
X
Figure 3. Tailstock controls.
Y
AB
Figure 4. Additional tailstock controls.
U. Quill Lock Lever: Secures quill in position.
V. Tailstock Lock Lever: Secures tailstock in
position along the bedway.
W. Graduated Scale: Indicates quill movement
in increments of 0.001" with one full revolu-
tion equaling 0.125" of quill travel.
X. Quill: Holds centers and tooling.
Y. Tailstock Offset Screws: Adjusts tailstock
offset left or right from spindle centerline
(1 of 2).
Z.
Quill Handwheel: Moves quill toward or
away from spindle.
AA. Offset Scale: Indicates relative distance of
tailstock offset from spindle centerline.
AB. Offset Locking Set Screw: Locks tailstock
in position left or right of spindle centerline.
V
W
Z
AA
-5-
Advertisement
Table of Contents
