Relocation And Storage; Precautions For Relocation And Storage - Epson VT Series Manipulator Manual

3.8 Relocation and Storage

3.8.1 Precautions for Relocation and Storage

Observe the following when relocating, storing, and transporting the Manipulators.
THE INSTALLATION SHALL BE PREFORMED BY QUALIFIED INSTALLATION
PERSONNEL AND SHOULD CONFORM TO ALL NATIONAL AND LOCAL
CODES.
■ Only authorized personnel should perform sling work and operate a crane and a
forklift. When these operations are performed by unauthorized personnel, it is
extremely hazardous and may result in serious bodily injury and/or severe
equipment damage to the robot system.
■ Stabilize the Manipulator with your hands when hoisting it. Unstable hoisting is
WARNING
extremely hazardous and may result in serious bodily injury and/or severe
equipment damage to the robot system as the fall of the Manipulator.
■ When removing the anchor bolts, support the Manipulator to prevent falling over.
Removing the anchor bolts without supporting the Manipulator may get hands,
fingers, or feet caught as the Manipulator may fall over.
■ To transport the Manipulator, secure it to the delivery equipment or have at least 2
people to hold it by hand.
screened parts in the figure).
hazardous and may cause your hands and fingers caught.
CAUTION
■ Make sure not to hold the power unit when transporting the manipulator.
Also, avoid excessive vibration or shock during Manipulator transporting.
Excessive vibration or shock may cause equipment damage and/or malfunction
of the Manipulator.
■ Stabilize the Manipulator with your hands when hoisting it. Unstable hoisting is
extremely hazardous and may result in fall of the Manipulator.
■ When transporting the Manipulator for a long distance, secure it to the delivery
equipment so that the Manipulator will not fall over. If necessary, pack the
Manipulator in the same way as it was delivered.
VT Rev.1
Setup & Operation 3. Environments and Installation
Also, do not hold the bottom of the base (the
Holding these parts by hand is extremely
VT6-A901* : Approx. 40 kg: 89 lb.
DO NOT hold the bottom of the base
by hand.
35