Table of Contents
Advertisement
Maintenance 16. LED Plate
16.1 Replacing LED Plate
Maintenance
LED Plate
parts
Hexagonal
wrench
Tools
Torque wrench
Cross-point screwdriver (No. 2)
Nippers
Belt tension meter
Wire tie
Material
LED Plate
(1) Turn OFF the Manipulator.
Removal
(2) Remove the Arm #2 Cover.
(3) Remove the LED plate.
LED Plate
(1) Install the LED plate.
Installation
(2) Mount the Arm #2 Cover.
226
Name
width across flats: 2.5 mm
width across flats: 3 mm
Reference: Maintenance 7.2 Arm #2 Cover
Cross-recessed screws: 2-M3×10
Cross-recessed screws: 2-M3×10
Tightening torque: 0.45 ± 0.1 N·m
Reference: Maintenance 7.2 Arm #2 Cover
Quantity
1
1749496
For M3 hexagon socket head cap
1
bolts
For M4 hexagon socket head cap
1
bolts
1
For tightening torque control
1
For cross-recessed screw
1
For cutting wire tie
1
Refer: Unitta U-505
-
Note
VT Rev.1
Hide quick links:
Advertisement
Table of Contents
