Unpacking And Transportation - Epson VT Series Manipulator Manual

3.4 Unpacking and Transportation

THE INSTALLATION SHALL BE PREFORMED BY QUALIFIED INSTALLATION
PERSONNEL AND SHOULD CONFORM TO ALL NATIONAL AND LOCAL
CODES.
■ Only authorized personnel should perform sling work and operate a crane and a
forklift. When these operations are performed by unauthorized personnel, it is
extremely hazardous and may result in serious bodily injury and/or severe
equipment damage to the robot system.
■ Stabilize the Manipulator with your hands when hoisting it. Unstable hoisting is
WARNING
extremely hazardous and may result in serious bodily injury and/or severe
equipment damage to the robot system as the fall of the Manipulator.
■ Using a cart or similar equipment, transport the Manipulator in the same manner
as it was delivered.
■ When removing the anchor bolts, support the Manipulator to prevent falling over.
Removing the anchor bolts without supporting the Manipulator may get hands,
fingers, or feet caught as the Manipulator may fall over.
■ To transport the Manipulator, secure it to the delivery equipment or have at least 2
people to hold it by hand. Also, do not hold the bottom of the base (the shaded
area in the figure). Holding the area by hand is extremely hazardous and may
cause your hands and fingers caught.
CAUTION
■ When transporting the Manipulator, avoid excessive vibration or shock.
Excessive vibration or shock may cause equipment damage and/or malfunction
of the Manipulator.
■ Stabilize the Manipulator with your hands when hoisting it. Unstable hoisting is
extremely hazardous and may result in fall of the Manipulator.
■ When transporting the Manipulator for a long distance, secure it to the delivery
equipment directly so that the Manipulator never falls over.
If necessary, pack the Manipulator in the same style as it was delivered.
VT Rev.1
Setup & Operation 3. Environments and Installation
VT6-A901* : Approx. 40 kg: 89 lb.
DO NOT hold the bottom of the base
by hand.
27