Section 5: Accessories - Grizzly G0824 Owner's Manual

ACCESSORIES

SECTION 5: ACCESSORIES

Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
T26685—ISO 32 Moly-D Machine Oil, 1 gal.
T23964—NLGI#2 Moly-D Grease, 14.5 oz.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
T23962 T23963
Figure 91. ISO 68 and ISO 32 machine oil and
multi-purpose grease.
order online at
Model G0824 (Mfd. Since 12/16)
T23964
T26685
www.grizzly.com
T10295—7-Pc. Indexable-Carbide Turning Set
⁄ " 7-piece turning tool set is ideal for just
This 5
8
about any project. Supplied with right-hand and
left-hand turning/facing tool holders, the set is
complimented with one threading and cut-off tool,
too. Indexable inserts ensure cutting surfaces
stay sharp.
Figure 92. T10295 7-Pc. Indexable Carbide Tool
T10439—4-Pc. Carbide Insert CCMT Boring
Bar Set
These right-hand indexable solid steel Boring
Bars use ⁄ " and ⁄ ", 80° diamond inserts and
1 3
4 8
feature a negative 7° end and side cutting angle.
Includes ⁄ " x 6", ⁄ " x 7",
3 1
8 2
boring bars. Set comes with Torx
fitted aluminum case with handle.
Figure 93. T10439 Carbide Insert CCMT Boring
Bar Set.
1-800-523-4777
or call
Set.
⁄ " x 8", and ⁄ " x 10"
5 3
8 4
wrenches and
®
-59-