Process Temperature Configuration - Honeywell SMV800 User Manual

2.3.7. Process Temperature Configuration

This tab provides the detail information about the ProcessTemperature parameters.
Refer the below table for Process Temperature Configuration:
Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Process Temp.Config
Process Temperature
Process Temperature Unit ●
Process Temperature LRV
Process Temperature URV
Process Temperature
Damping
Process Temperature URL
Process Temperature LRL
Revision 1.0
Process Temperature Configuration parameters
degC
●
degF
●
degR
●
Kelvin
SMV800 Modbus User's Guide
The current value of the Process
Temperature input
The user selected engineering unit for
the Process Temperature input.
The Lower Range Value for the
Process Temperature input (which
represents 0% output) in user selected
engineering units. This value may be
configured to any value within the range
PT LTL to PT UTL.
The Upper Range Value for the
Process Temperature input (which
represents 100% output) in user
selected engineering units. This value
may be configured to any value within
the range PT LTL to PT UTL.
Damping value for the Process
Temperature output. The upper limit for
temp damping is 102. Entries may be
any value from 0.00 to 32.00 seconds.
The Upper Range Limit for the Process
Temperature input
The Lower Range Limit for the Process
Temperature input
Page 29