Honeywell SMV800 User Manual page 3

This guide provides the details of programming Honeywell SMV800 Multivariable Transmitters for
applications involving Modbus protocol.
For installation, wiring, and maintenance information, refer to the SMV800 Multivariable
Transmitter User Manual, Document # 34-SM-25-03.
The configuration of your transmitter depends on the mode of operation and the options selected for
it with respect to operating controls, displays and mechanical installation.
To digitally integrate a Transmitter with one of the following systems:

For the Experion PKS through SCADA, Experion HS, you will need to supplement the
information in this document with the data and procedures in the Experion Knowledge
Builder.

For Honeywell's TotalPlant Solutions (TPS), you will need to supplement the information
in this document with the data in the PM/APM SmartLine Transmitter Integration Manual,
which is supplied with the TDC 3000 book set. (TPS is the evolution of the TDC 3000).
Release Information
Document Name/ID
SMV800 Modbus User's Guide - 34-SM-25-09
First Release
References
The following list identifies all documents that may be sources of reference for material discussed
in this publication.
SMV800 Multivariable Transmitter User's Manual, # 34-SM-25-03
SmartLine Pressure Transmitter Quick Start Installation Guide, # 34-SM-25-04
SMV800 Configuration and Parameter Dependencies #34-SM-00-06
Revision 1.0
About This Document
SMV800 Modbus User's Guide
Release Publication Date
Number
1.0 August 2018
Page iii