Honeywell Thor CV41 User Manual page 58

6. For Network Authentication, choose Open or Shared. The Encryption type
7. For Network Key, enter the pre-shared key or the passphrase.
8. For Confirm Network Key, enter the pre-shared key or the passphrase again.
9. Select Enable IEEE 802.1x Authentication for this network.
10. In EAP type, choose either PEAP or Smart Card or other certificate.
11. Tap the Properties button.
12. Select Validate server certificate.
13. Select a root certificate or load a root certificate of the authentication server on your
14. Tap OK to exit the Properties screen
15. Tap OK again to save the Microsoft Security settings.
Configure Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with Microsoft security.
Honeywell recommends that you use WPA2-PSK instead of WEP if possible.
1. Make sure the communications and radio parameters on your computer are config-
2. Tap Start > Network Connections. The Network Connections screen appears.
3. Tap and hold onto the Wireless Network Connection icon until the pop-up screen
4. Tap the Wireless Networks tab.
5. Make sure your wireless network you are configuring is selected and tap the
6. For Network Authentication, choose Open.
7. For Data Encryption, choose WEP.
8. For Network Key, enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
9. For Confirm Network Key, enter the the ASCII or hex key again.
10. For Network Key Index, select the key you want to use for data transmission or
11. Save your settings.
Use Open (No Security) Associations With Microsoft Security
Use the following procedure to configure your computer for open security using Micro-
soft WZC.
50
automatically defaults to WEP.
computer. For help, see
ured.
appears and select Properties.
Properties button.
long depending on the capability of the radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
select The key is provided for me automatically.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Load a Certificate.