Honeywell Thor CV41 User Manual page 60

4. (Optional) In the Profile Label text box, enter a meaningful name for your profile.
5. Configure your security settings. For help, see the next sections.
6. Repeat Steps 3 through 5 for each profile you want to define.
7. Set an active profile by choosing it from the Active Profile list.
8. Save your settings.
Configure WPA or WPA2 Enterprise (802.1x) Security With Wireless Security
Use these procedures to set WPA-802.1x or WPA2-802.1x security on your computer
with Wireless security.
1. Make sure the communications and radio parameters on your computer are config-
2. Make sure Wireless is selected as your security choice.
3. Start Intermec Settings.
4. Choose Communications > 802.11 Radio > Wireless Security.
5. Select the profile you want to configure.
6. For Association, choose WPA or WPA2. Encryption automatically defaults to TKIP
7. For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
8. If you choose TTLS, EAP-FAST, or PEAP:
Note: The correct date must be set on your computer when you enable Validate Server
Certificate.
9. If you choose TLS:
Configure WPA or WPA2 Personal (PSK) Security With Wireless Security
Use the following procedure to configure WPA-PSK or WPA2-PSK with Wireless security.
1. Make sure the communications and radio parameters on your computer are config-
2. Make sure Wireless is selected as your security choice.
3. Start Intermec Settings.
4. Choose Communications > 802.11 Radio > Wireless Security.
5. Select the profile you want to configure.
52
ured.
or AES, respectively.
a. For Prompt for Credentials, choose Enter credentials now.
b. Enter a User Name and User Password.
c. For Validate Server Certificate, choose Yes.
a. Load a user and root certificate on your computer. For help, see
Certificate.
b. Enter a User Name and Subject Name.
c. For Validate Server Certificate, choose Yes.
ured.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Load a