Connect To A Serially Tethered Scanner - Honeywell Thor CV41 User Manual

Connect to a Serially Tethered Scanner

Use this procedure to connect a tethered scanner and enable RS-232 communications.
1. Connect the scanner to the COM1 or COM2 port.
2. From the Intermec Settings main menu, select Tethered Scanner (COM 1 or COM
3. Tap Scanner Settings.
4. Perform one of these items based on the type of scanner you are connecting:
5. Tap Enable scanner port.
6. Check the Enable scanner port check box and tap OK.
46
2).
•
For an SR30 or SR61T scanner, tap Scanner Settings, select SR Intermec
Scanner, and then tap OK.
•
For an ASCII scanner, tap Scanner Settings, select ASCII, and then tap OK. Set up
the appropriate COM port settings by selecting Scanner Port Settings.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide