Radio Configuration Bar Codes; 2D Configuration Bar Codes - Honeywell Thor CV41 User Manual

Radio Configuration Bar Codes

Use an external scanner to read the following ScanNGo bar codes to enable the 802.11
radio and set the defaults for either Wireless security or Microsoft security. After you
scan the bar codes, you will still need to use Intermec Settings or another configuration
program to set network-specific settings on your computer and to configure the wire-
less security.
Note: If you are using Microsoft security, you can only use the 1D configuration bar codes.
The following ScanNGo bar codes were created using SmartSystems Foundation. For
more information on SmartSystems Foundation, see
SmartSystems

2D Configuration Bar Codes

You can configure the computer with a 2D imager.
1. Scan the appropriate bar code from the table and wait for the program to start.
2. Follow any instructions on the device.
2D Imager Radio Configuration Bar Codes
When You Want To:
•
•
1D Configuration Bar Codes
You can configure the computer with a 1D imager.
1. Scan the START HERE bar code from the table and wait for the program to start.
2. Scan the 1/9 bar code.
3. Scan the rest of the bar codes in any order.
100
Foundation.
Set all communication settings to defaults
(Wi-Fi, WWAN if applicable)
Enable Wi-Fi - set Wireless security to
defaults
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Manage the Computer Using
Scan This Bar Code