Activate Umts Communications - Honeywell Thor CV41 User Manual

OneClick Internet Status Buttons and Icons (Continued)
Icons

Activate UMTS Communications

You use a SIM card to activate UMTS communications on your computer. You can pur-
chase the SIM card from your network provider.
1. Remove the computer from the smart dock.
2. Press the Power button. The computer turns off.
3. Using a small Phillips screwdriver, remove the two screws that secure the SIM card
4. Insert the SIM card into the SIM card slot.
5. Reattach the SIM card access panel and screw to a torque value of 4-5 in/lbs.
6. Reattach the computer to the smart dock.
7. Connect an external WWAN antenna. For more information, see
8. Press the Power button. The computer turns on.
9. Tap Start > All Programs > OneClick Internet > OneClick Internet. The Oneclick
10. If the carrier is not detected, tap Settings and select the Firmware tab.
11. Select your carrier and tap Change.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide
Description
Connected to WWAN.
Connection failure.
access panel.
Antenna.
Internet application opens and tries to detect the carrier of the SIM you just inserted.
SIM card
Connect an External
59