Attach The Cv41 To The Smart Dock - Honeywell Thor CV41 User Manual

Attach the CV41 to the Smart Dock

After you secure the smart dock and connected it to power, you can attach the computer
to the smart dock.
1. Press the Power button. The computer turns off.
2. Locate the protruding lip on the rear of the computer.
3. Place the lip of the computer over the top of the dock.
4. Slide the CV41 from side-to-side until the computer is seated into the smart dock.
5. Push down onto the smart dock until you hear click.
6. If necessary, adjust the viewing angle by adjusting the pivot arm on the RAM mount.
7. Press the Power button on the smart dock to turn on the dock.
8. Press the Power button on the CV41 to turn on the CV41.
8 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide