Isdn Bri Line Configuration; Isdn Bri Provisioning By Switch Type - Cisco 2800 Series Manual

ISDN BRI Line Configuration

Before using a router with an ISDN basic rate interface (BRI) interface, you must order a correctly
configured ISDN BRI line from your local telecommunications service provider.
The ordering process varies from provider to provider and from country to country. However, some
general guidelines apply:
•
•
•
•

ISDN BRI Provisioning by Switch Type

ISDN BRI provisioning refers to the types of services provided by the ISDN BRI line. Although
provisioning is performed by your ISDN BRI service provider, you must tell the provider what you want.
Table 2
Table 2
Switch Type
5ESS Custom BRI
5ESS Custom BRI
OL-5992-01
Ask for two channels to be called by one number.
Ask for delivery of calling line identification, also known as Caller ID or automated number
identification (ANI).
If the router will be the only device attached to the ISDN BRI line, ask for point-to-point service
and a data-only line.
If you plan to connect another ISDN device (such as an ISDN telephone) to the ISDN BRI line
through the router, ask for point-to-multipoint service (subaddressing is required) and a
voice-and-data line.
lists the provisioning you that should order for the router, based on switch type.
ISDN Provisioning by Switch Type
Provisioning
For data only
2 B channels for data.
Point to point.
Terminal type = E.
1 directory number (DN) assigned by service provider.
MiniTerm (MTERM) = 1.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
For voice and data
(Use these values only if you have an ISDN telephone connected.)
2 B channels for voice or data.
Multipoint.
Terminal type = D.
2 directory numbers assigned by service provider.
2 service profile identifiers (SPIDs) required, assigned by service provider.
MTERM = 2.
Number of call appearances = 1.
Display = No.
Ringing/idle call appearances = idle.
Autohold= no.
Onetouch = no.
Request delivery of calling line ID on Centrex lines.
Set speed for ISDN calls to 56 kbps outside local exchange.
Directory number 1 can hunt to directory number 2.
Examples of Using the Setup Command Facility to Configure Interface Parameters
Basic Software Configuration Using the Setup Command Facility
17