Cisco 2800 Series Manual page 79

IP Communication Solution for Group Applications Configuration Example
•
•
•
•
•
•
•
•
•
•
•
The information in this document reflects use of devices in a specific lab environment. All devices used
in this configuration example started with a cleared (default) configuration. If you are working with a
live network, ensure that you understand the potential effects of any command before you use it. The
configuration example presented in this document depicts a combination of features on a single branch
office router. Users of this document should review the documents listed under
Information" section on page
Related Products
This configuration can also be used with any Cisco 2800 and Cisco 3800 series routers.
Conventions
For more information on document conventions, see the
2 channelized T1/PRI ports
4 voice FXS interfaces (VIC-4FXS-DID)
2 voice E&M interfaces (VIC2-2E&M)
1 Cisco service engine (NM-CUE)
1 Cisco Content Engine (NM-CE-BP)
A VIC2-4FS in slot 0
A VIC2-2FXS in slot 1
An HWICD-9ESW with inline power card in slots 2-3 (double-wide)
Cisco CallManager Release 3.3(3)
Cisco IOS Release 12.3(11)T or later
Enterprise Services feature set
43.
the"Related
Cisco Technical Tips Conventions.
OL-6574-01
Prerequisites
3