Connecting A Voice Isdn Bri Line - Cisco 860 Series Hardware Installation Manual

Chapter 3 Connecting the Router

Connecting a Voice ISDN BRI Line

Use a straight-through RJ-45 cable to connect the Voice Basic Rate Interface (BRI) port to the ISDN
network through a telephone wall outlet or other device.
Caution To prevent damage to the router, be sure to connect the BRI cable to the BRI connector only, and not to
any other RJ-45 connector.
To connect the Voice BRI line, follow these steps:
Connect one end of a straight-through RJ-45–to–RJ-45 cable to the Voice BRI port.
Step 1
Note
OL-16193-01
When the interface is configured as NT and is connecting to a TE device, use a crossover cable.
See Table A-7.
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
Connecting a Voice ISDN BRI Line
3-17