Basic Software Configuration Using The Cisco Ios Command-Line Interface; Use This Document With The Following Platforms; Cisco 1800 Series Routers; Cisco 2800 Series Routers - Cisco 2800 Series Manual

Basic Software Configuration Using the
Cisco IOS Command-Line Interface
This document describes how to use the Cisco IOS command-line interface (CLI) to perform a basic
software configuration for your router.
Contents
•
•
•
•
•
•
Platforms Supported by This Document

Use this document with the following platforms:

•
•
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Platforms Supported by This Document, page 1
Prerequisites for Basic Software Configuration Using the Cisco IOS CLI, page 2
Restrictions for Basic Software Configuration Using the Cisco IOS CLI, page 2
How to Perform a Basic Software Configuration Using the Cisco IOS CLI, page 2
Where to Go Next, page 19
Additional References, page 19

Cisco 1800 series routers

Cisco 2800 series routers

Cisco 3800 series routers