Verifying Network Connectivity - Cisco 2800 Series Manual

Configuring AUX-to-AUX Port Async Backup with Dialer Watch, sample configuration
http://www.cisco.com/warp/public/471/aux-aux-watch.html
Modem-Router Connection Guide, tech note
http://www.cisco.com/warp/public/76/9.html
SUMMARY STEPS
1.
2.
3.
4.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
line aux 0
Example:
Router(config)# line aux 0
Step 4 See the tech notes and sample configurations to
configure the line for your particular implementation
of the AUX port.
What to Do Next
Proceed to the

Verifying Network Connectivity

This section describes how to verify network connectivity for your router.
OL-5593-01
enable
configure terminal
line aux 0
See the tech notes and sample configurations to configure the line for your particular
implementation of the AUX port.
"Verifying Network Connectivity" section on page
How to Perform a Basic Software Configuration Using the Cisco IOS CLI
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Starts the line configuration command collection mode for
the auxiliary line.
—
Basic Software Configuration Using the Cisco IOS Command-Line Interface
15.
15