Cisco 2800 Series Manual page 217

13.
14.
15.
16.
17.
18.
19.
DETAILED STEPS
Command or Action
Step 1
IP_ADDRESS=ip_address
Example:
rommon > IP_ADDRESS=172.16.23.32
Step 2
IP_SUBNET_MASK=ip_address
Example:
rommon > IP_SUBNET_MASK=255.255.255.224
Step 3
DEFAULT_GATEWAY=ip_address
Example:
rommon > DEFAULT_GATEWAY=172.16.23.40
Step 4
TFTP_SERVER=ip_address
Example:
rommon > TFTP_SERVER=172.16.23.33
Step 5
TFTP_FILE=[directory-path/]filename
Example:
rommon > TFTP_FILE=archive/rel22/c2801-i-mz
Step 6
FE_PORT=[0 | 1]
Example:
rommon > FE_PORT=0
Step 7
FE_SPEED_MODE=[0 | 1 | 2 | 3 | 4]
Example:
rommon > FE_SPEED_MODE=3
OL-5997-02
TFTP_MACADDR=MAC_address
TFTP_RETRY_COUNT=retry_times
TFTP_TIMEOUT=time
TFTP_VERBOSE=setting
set
tftpdnld [-hr]
y
How to Use the ROM Monitor—Typical Tasks
Purpose
Sets the IP address of the router.
Sets the subnet mask of the router.
Sets the default gateway of the router.
Sets the TFTP server from which the software will be
downloaded.
Sets the name and location of the file that will be
downloaded to the router.
(Optional) Sets the input port to use one of the Fast Ethernet
ports.
(Optional) Sets the Fast Ethernet port speed mode, with
these options:
0—10 Mbps, half-duplex
•
1—10 Mbps, full-duplex
•
2—100 Mbps, half-duplex
•
3—100 Mbps, full-duplex
•
4—Automatic selection (default)
•
Using the ROM Monitor
21