Cisco 2800 Series Manual page 227

Additional References
The following sections provide references related to using the ROM monitor.
Related Documents
Related Topic
Connecting your PC to the router console port
Break key sequence combinations for entering ROM
monitor mode within the first 60 seconds of rebooting
the router
Upgrading the ROM monitor
Using the boot image (Rx-boot) to recover or upgrade
the system image
Booting and configuration register commands
Loading and maintaining system images; rebooting
Choosing and downloading system images
Console download (xmodem)
Router crashes
Router hangs
OL-5997-02
Document Title
Quick start guide for your router
•
Hardware installation guide for your router
•
Standard Break Key Sequence Combinations During Password
Recovery
ROM Monitor Download Procedures for Cisco 2691, Cisco, 3631,
Cisco 3725, and Cisco 3745 Routers
These procedures also apply to Cisco 1841 series,
Note
Cisco 2800 series, and Cisco 3800 series routers.
How to Upgrade from ROMmon Using the Boot Image
Cisco IOS Configuration Fundamentals Command Reference
Cisco IOS Configuration Fundamentals and Network Management
Configuration Guide
Software Center at
http://www.cisco.com/kobayashi/sw-center/index.shtml
Xmodem Console Download Procedure Using ROMmon
Troubleshooting Router Crashes
Understanding Software-forced Crashes
Troubleshooting Router Hangs
Additional References
Using the ROM Monitor
31