Cisco 2800 Series Manual page 181

Hoot and Holler over V3PN Configuration Example
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): vendor ID is DPD
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): processing vendor id payload
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1): speaking to another IOS box!
Jul 29 16:06:33.635 PDT: ISAKMP:received payload type 20
Jul 29 16:06:33.635 PDT: ISAKMP:received payload type 20
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
Jul 29 16:06:33.635 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM4
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Send initial contact
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):SA is doing pre-shared key authentication using
id type ID_IPV4_ADDR
Jul 29 16:06:33.639 PDT: ISAKMP (0:134217730): ID payload
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Total payload length: 12
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1): sending packet to 10.32.150.46 my_port 500
peer_port 500 (I) MM_KEY_EXCH
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Jul 29 16:06:33.639 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM4
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): received packet from 10.32.150.46 dport 500
sport 500 Global (I) MM_KEY_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing ID payload. message ID = 0
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): ID payload
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing HASH payload. message ID = 0
! REMOTE PEER IS SHOWN TO BE AUTHENTICATED IN THE NEXT LINE.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):SA authentication status:
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):SA has been authenticated with 10.32.150.46
Jul 29 16:06:33.643 PDT: ISAKMP: Trying to insert a peer 10.32.152.26/10.32.150.46/500/,
and inserted successfully.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM5
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL,
IKE_PROCESS_MAIN_MODE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM6
Jul 29 16:06:33.643 PDT: ISAKMP (0:134217730): received packet from 10.32.150.46 dport 500
sport 500 Global (I) MM_KEY_EXCH
Jul 29 16:06:33.643 PDT: ISAKMP: set new node 2118711810 to QM_IDLE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing HASH payload. message ID =
2118711810
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1): processing DELETE payload. message ID =
2118711810
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):peer does not do paranoid keepalives.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):deleting node 2118711810 error FALSE reason
"Informational (in) state 1"
Jul 29 16:06:33.643 PDT: IPSEC(key_engine): got a queue event with 1 kei messages
Jul 29 16:06:33.643 PDT: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
! PHASE 1 IS SHOWN TO BE COMPLETED SUCCESSFULLY IN THE NEXT LINE.
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):Old State = IKE_I_MM6
IKE_P1_COMPLETE
Jul 29 16:06:33.643 PDT: ISAKMP:(0:2:SW:1):beginning Quick Mode exchange, M-ID of
159862783
next-payload : 8
type : 1
address : 10.32.152.26
protocol : 17
port : 500
length : 12
next-payload : 8
type : 1
address : 10.32.150.46
protocol : 17
port : 500
length : 12
authenticated
Troubleshoot
New State = IKE_I_MM4
New State = IKE_I_MM5
New State = IKE_I_MM6
New State = IKE_I_MM6
New State =
OL-6573-01
41