Configure - Cisco 2800 Series Manual

Configure

Configure
In this section, you are presented with the information to configure the features described in this
document.
To find additional information on the commands used in this document, use the
Note
Lookup
your username or password, click Cancel at the login dialog box and follow the instructions that appear.
Configuration Tips
•
•
•
•
Network Diagram
This document uses the network setup shown in the following diagram.
OL-6574-01
4
tool. You must have an account on Cisco.com. If you do not have an account or have forgotten
The gigabit port on the router does not provide inline power.
Routing should be enabled and assumed to be configured.
The external flash card on the integrated services routers holds the router image, VLAN database,
graphical user interface (GUI) files for Cisco CME and Cisco Unity Express. It should not be
removed during the normal operation of the router.
The LMR integration to the router might require radio frequency (RF)/radio skills (typically a
non-IP and proprietary implementation). The radio–to–router physical cable might not be available
off–the–shelf.
10
9
2 3
IP Communication Solution for Group Applications Configuration Example
11
1
IP
4
8
7
Cisco IOS Command
IP IP
5
6