Safety Recommendations - Cisco 1003 User Manual

Preparing to Install Your Cisco 1003 or Cisco 1004 Router
Preparing to Install Your Cisco 1003 or Cisco 1004 Router
It takes just a few simple steps to install your router. But before you install your router,
please read the safety information in this section.
Note
publication in the section "Translated Safety Warnings." Additional guidelines related to
regulatory compliance and safety are available in the Cisco 1003 and Cisco 1004 Public
Network Certification publication.

Safety Recommendations

Warning
bodily injury. Before you work on any equipment, be aware of the hazards involved with
electrical circuitry and standard practices for preventing accidents. To see translated
versions of this warning, refer to the section "Translated Safety Warnings" at the end of this
publication.
Because any device that uses electricity must be treated with respect, follow these
guidelines to ensure general safety:
•
Keep the area clear and dust-free during and after installation.
•
Keep tools away from walk areas where you and others could trip over them.
•
Wear safety glasses when working under any conditions that might be hazardous to your
eyes.
•
Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
6 Cisco 1003 and Cisco 1004 User Guide
Translations of the safety warnings in this document are available at the end of this
The warning symbol means danger. You are in a situation that could cause