Table of Contents
Advertisement
Configuring Your Cisco 1003 or Cisco 1004 Router
32 Cisco 1003 and Cisco 1004 User Guide
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
Cisco IOS (tm) 1000 Software (C1000-H-M), Version 10.3(15626) [enf
226]
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Mon 05-Jun-95 15:40 by enf
Image text-base: 0x02004000, data-base: 0x022568F8
cisco 1000 (68360) processor (revision 0x00) with 3584K/512K bytes of
memory.
Processor board serial number 01335805
Bridging software.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
1 ISDN Basic Rate interface.
Integrated NT1 for ISDN Basic Rate interface
8K bytes of non-volatile configuration memory.
2048K bytes of processor board PCMCIA flash (Read/Write)
Notice: NVRAM invalid, possibly due to write erase.
--- System Configuration Dialog ---
At any point you may enter a question mark '?' for help.
Refer to the 'Getting Started' Guide for additional help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Would you like to enter the initial configuration dialog? [yes]:yes
First, would you like to see the current interface summary? [yes]: yes
Any interface listed with OK? value "NO" does not have a valid
configuration
Advertisement
Table of Contents
