Cisco 1003 User Manual page 16

Installing Your Cisco 1003 or Cisco 1004 Router
Step 4
Note
seated in the connector (inside the router). Press the black plastic eject button at the right
side of the slot to eject the Flash memory card. Then reinsert the card and replace the door.
16 Cisco 1003 and Cisco 1004 User Guide
Align the bottom of the door with the bottom of the PCMCIA slot. Then rotate the
top of the door toward the rear panel until the plastic tabs snap into place.
Replacing the door prevents dust from entering the chassis.
If you cannot close the door completely, the Flash memory card might not be firmly
Tabs
12VDC