Connecting A Console; Connecting The Power Supply - Cisco 1003 User Manual

Connecting a Console

If your router is not already configured, use the console cable provided with your router to
connect a console (an ASCII terminal or PC running terminal emulation software). To
connect a console, follow these steps:
Step 1
Step 2
Step 3

Connecting the Power Supply

Your router ships with either a desktop or wall-mount power supply. This section explains
how to connect both types of power supplies. The desktop power supply is approved for use
with both routers, but the wall-mount power supply is approved for use with the Cisco 1004
router only.
Connect the supplied rollover console cable (RJ-45-to-RJ-45) to the console port
on the router.
Console port
Roll-over
console cable
Connect the other end of the console cable to a terminal or PC. The terminal or PC
port might require an RJ-45-to-DB-25 adapter.
Set your terminal or PC terminal emulation software to 9600 baud, 8 data bits, no
parity, and 1 stop bit.
Installing Your Cisco 1003 or Cisco 1004 Router
Cisco 1003 and Cisco 1004 User Guide 23
12VDC