Dlp-G254 Place Opt-Bst And Opt-Bst Ports Out Of Service; Dlp-G255 Place 32Mux-0, 32Wss, 32Dmx-O, And 32Dmx Ports Out Of Service - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G254 Place OPT-BST and OPT-BST Ports Out of Service

DLP-G254 Place OPT-BST and OPT-BST Ports Out of Service
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
On the shelf graphic in CTC, double-click the OPT-BST or OPT-PRE card with the ports you want to
Step 1
put out of service.
Click the Provisioning > Optical Line > Parameters tabs.
Step 2
Under Admin State, choose OOS,DSLB for each port that does not have an OOS-MA,DSLB service
Step 3
state.
Step 4 Click Apply.
In the confirmation dialog box, click Yes.
Step 5
Click the Provisioning > Opt Apli Line > Parameters tabs.
Step 6
Under Admin State, choose OOS,DSLB for each port that does not have an OOS-MA,DSLB service
Step 7
state.
Click Apply.
Step 8
In the confirmation dialog box, click Yes.
Step 9
Return to your originating procedure (NTP).
Step 10

DLP-G255 Place 32MUX-0, 32WSS, 32DMX-O, and 32DMX Ports Out of Service

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
On the shelf graphic in CTC, double-click the 32MUX-O or 32DMX card with the ports you want to put
Step 1
out of service.
Step 2 Click the Provisioning > Optical Chn > Parameters tabs. (For 32WSS cards, the tabs are Provisioning
> Optical Chn Optical Connector 1 > Parameters.)
Under Admin State, choose OOS,DSLB for each port that does not have an OOS-MA,DSLB service
Step 3
state.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
11-16
This task places OPT-BST and OPT-PRE card ports out of service in
preparation for card removal.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
This task places 32MUX-O, 32WSS, 32DMX-O, and 32DMX card ports
out of service in preparation for card removal.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
Chapter 11 Maintain the Node
September 2004