Dlp-G202 Change Optical Channel Threshold Settings For Oscm And Osc-Csm Cards; Table 10-4 Oscm And Osc-Csm Cards Optical Channel Thresholds Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G202 Change Optical Channel Threshold Settings for OSCM and OSC-CSM Cards

DLP-G202 Change Optical Channel Threshold Settings for OSCM and OSC-CSM
Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the OSCM or OSC-CSM card where you want to change the optical channel
Step 1
threshold settings.
Step 2 Click the Provisioning > Optical Line > Optics Thresholds tabs.
Modify any of the settings described in
Step 3
Table 10-4
Parameter
Port
Power Low
(dBm)
Power High
(dBm)
Click Apply.
Step 4
Step 5 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-8
This task changes the optical channel threshold settings for OSCM and
OSC-CSM cards.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
OSCM and OSC-CSM Cards Optical Channel Thresholds Settings
Description
Display only. Displays the port number.
Set the low power settings.
Set the high power settings.
Table 10-4.
Options
—
Numeric. Can be set for 15-minute or
one-day intervals for Warning or Alarm.
Select the bullet and click Refresh.
Numeric. Can be set for 15-minute or
one-day intervals for Warning or Alarm.
Select the bullet and click Refresh.
Chapter 10 Change Card Settings
September 2004