Chapter 4 - Vehicle Mounting And Accessory Installation; Introduction; Prepare For Vehicle Mounting; Quick Start - Honeywell Thor VM2 User Manual

4
Vehicle Mounting and Accessory Installation

Introduction

The Thor VM2 is designed to be mounted to a dock in a vehicle with either a RAM mount or U Bracket system. A power cable is
provided with the Thor VM2 dock. An optional 21 key numeric or 95 key laptop-style USB keyboard and keyboard mounts are
available. An integrated scanner mount is also offered. Optional communication cables are available.
Vehicle mounting brackets are specifically designed for vehicle mount applications. The vehicle mounted assembly restrains the
Thor VM2 and isolates it from shock and vibration. A RAM metal table stand is available to secure the Thor VM2 and dock when
in an office environment, for example.
The vehicle mount holds the dock and the Thor VM2 attaches to the dock. The dock remains attached to the vehicle, however,
the Thor VM2 has a quick release located on the lower rear side that allows the Thor VM2 to easily be removed from the dock.
The Thor VM2 can be operated for a minimum of 30 minutes from an internal UPS battery when not attached to a dock. The
Thor VM2 can be transferred from one dock equipped vehicle to another for easy portability. The dock provides accessory
attachment and conditioned power for the Thor VM2.
Overhead, dash and roof support pillar mounting is via a RAM Mount or U-bracket accessory which includes all the hardware
required for vehicle mounting.
Never put the Thor VM2 into the vehicle mounted assembly until the assembly is securely fastened to the vehicle.

Prepare for Vehicle Mounting

The Thor VM2 should be secured to an area in the vehicle where it:
• Does not obstruct the driver's vision or safe vehicle operation.
• Will be protected from rain or inclement weather.
• Will be protected from extremely high concentrations of dust or wind-blown debris.
• Can be easily accessed by a user seated in the driver's seat while the vehicle is not in operation.

Quick Start

The following list outlines, in a general way, the process to follow when mounting the Thor VM2 in a vehicle. Refer to the fol-
lowing sections in this document for more details.
1. Install RAM Mount
2. Place Thor VM2 in the Dock
3. Secure accessories such as an optional external keyboard or a scanner holder to either an integrated or remote
mounting bracket.
4. Adjust the Thor VM2 to the best viewing angle.
5. Install Remote Antenna
6. Connect Cables
7. Connect vehicle power:
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid)
• Thor VX8 / Thor VX9 Adapter Cable
• VX6 / VX7 Adapter Cable
8. Secure all cables in
The Thor VM2 is ready for use.
(page 4-4) or Install U Bracket Mount
(page 4-2).
(page 4-45) or Install External Antenna
(page 4-16) for any peripherals.
(page 4-33)
(page 4-32)
Strain Relief Cable Clamps
(page 4-13) to the vehicle.
(page 4-44) if necessary.
(page 4-19)
(page 4-16).
(page 4-28)
(page 4-24).
4 - 1