Reconnect - Honeywell Thor VM2 User Manual

Option
Prompt if devices request
to pair
Continuous Search
Filtered Mode
Printer Port - COM7
Logging
Computer Friendly Name Default: Computer System Name (System Panel > Device Name tab).

Reconnect

Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.
Function
This option is Enabled by default.
A dialog box appears on the Thor VM2 screen notifying the user a Bluetooth device
requests to pair with the Thor VM2.
The requesting Bluetooth device does not need to have been Discovered by the Thor
VM2 before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the screen.
Note: In some cases, if a Bluetooth device is already paired this setting cannot be
changed. If this is the case, an error message is displayed and the option is
not changed. The Bluetooth device must be disconnected before changing this
setting.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it has
paired with when the connection is broken (such as the paired device entering Sus-
pend mode, going out of range or being turned off). When disabled, after being en-
abled, the Thor VM2 stops searching after 30 minutes. This option draws power from
the Main Battery.
This option is Enabled by default.
Determines whether the Bluetooth client discovers and displays all serial Bluetooth
devices in the vicinity (Filtered Mode is disabled/unchecked) or the discovery result
displays Bluetooth scanners and printers only (Filtered Mode is enabled/checked).
When Filtered Mode is disabled, the Thor VM2 can pair with up to four Bluetooth de-
vices.
A Warmboot is required every time Filtered Mode is toggled on and off.
This option is Disabled by default.
This option assigns Bluetooth printer connection to COM7 instead of COM19. To en-
able this option, Filtered Mode must be enabled.
This option is Disabled by default.
When logging is enabled, the Thor VM2 creates bt_log.txt and stores it in the /Sys-
tem folder. Bluetooth activity logging is added to the text file as activity progresses. A
bt_log_bak.txt file contains the data stored by bt_log.txt prior to reboot.
During a reboot process, the Thor VM2 renames bt_log.txt to bt_log_bak.txt. If a file
already exists with that name, the existing file is deleted, the new bt_log_bak.txt file
is added and a new bt_log.txt is created.
The name, or identifier, entered in this space by the System Administrator is used ex-
clusively by Bluetooth devices and during Bluetooth communication.
5 - 33