Dock - Honeywell Thor VM2 User Manual

7. Set terminal emulation parameters.
8. Set AppLock parameter via the
9. Set DCWedge parameters via the
10. Save Changes to the Registry
11. Set Date / Time

Dock

The Thor VM2 assembly consists of two parts, the Thor VM2 computer and the dock. The Thor VM2 contains an internal UPS
battery that, once fully charged, powers the Thor VM2 for a minimum of 30 minutes when the unit is not mounted in the dock.
All docks provide:
• A mount for the Thor VM2 computer. The dock attaches to a vehicle via a RAM or U-bracket mount or to a RAM table stand
for use in an office environment.
• Conditioned power for the Thor VM2. The dock accepts 10-60VDC power input directly or 50-150VDC power input with a DC/
DC converter.
• Mobility of the Thor VM2, since the dock remains attached to the vehicle the Thor VM2 computer can easily be moved from
one vehicle equipped with a dock to another.
• Several I/O ports as described in the table below.
• Strain relief provisions for cables.
• Headset connection via an adapter cable. When a headset is not attached, the microphone and speakers on the Thor VM2
are active.
The features of the dock are described below:
VM1D Dock
SKUs VM1001VMCRADLE (with RAM ball)
VM1002VMCRADLE
VM1003VMCRADLE
Power Direct, DC/DC Adapter, AC/DC Adapter
Connection
Serial COM1 and COM2
Ports
USB Ports USB port provides host and client connections via an adapter cable.
This port also supports Honeywell external keyboards.
Ethernet N/A
CANbus CANbus connection via an adapter cable
Audio Headset connection via an adapter cable
Screen Supported via COM1 and COM2 connectors.
Blanking
Ignition Supported
Control
Administration
Data Collection
(page 5-2).
(page 5-56) if not set during first boot.
(page 5-19) control panel.
(page 5-40) control panel.
2 - 3