Status; Exit - Honeywell Thor VM2 User Manual

Authentication Wireless
It is not recommend to enable "Manage Wireless Settings" for Summit Client devices.
Troubleshooting - When you download a profile that is configured to manage network and wireless settings, the
Enabler will not apply the manage network and wireless settings to the adapter unless the global Manage wireless set-
tings and Manage network settings options are enabled on the Adapters (page 7-12) panel. Until these options are
enabled, the network and wireless settings are controlled by the third-party software associated with these settings.

Status

The Status panel displays the current status of the Thor VM2 network adapter selected in the drop down box. Note the
availability of the Windows standard Refresh button.
When the Windows Refresh button is tapped, the signal strength, signal quality and link speed are refreshed for the
currently selected adapter. It also searches for new adapters and may cause a slight delay to refresh the contents of
the drop-down menu.
Link speed indicates the speed at which the signal is being sent from the adapter to the Thor VM2. Speed is depen-
dent on signal strength.

Exit

The Exit option is password protected. The default password is leave. The password is not case-sensitive.
7 - 14