Input Panel; Transcriber - Honeywell Thor VM2 User Manual

Input Panel

Start > Settings > Control Panel > Input Panel
Set the current Thor VM2 keys and data input method.
Factory Default Settings
Input Panel
Input Method
Allow applications to change input panel state
Options button
Keys
Use gestures
Use this panel to make the Input Panel (on-screen keyboard) or the physical keypad primarily available when entering data
on any screen. Selecting Keyboard enables both.
Tap the Options button to set the size of the keys displayed on-screen and whether Transcriber gestures are enabled or dis-
abled.

Transcriber

When choosing Transcriber as the Current Input Method, first tap the Keyboard icon in the status bar. Select Tran-
scriber from the pop-up menu. Then open the Input control panel and tap the Options button. Transcriber Options
(Start > Settings > Control Panel > Input Panel) are available only when Transcriber is selected as the active input
method. Tap the "?" button or the Help button to access Transcriber Help.
5 - 66
Keyboard
Enabled
Small keys
Disabled